Skip to main content
Hurst · From $3,500

Full Chimney Removal to Foundation in Hurst, TX

A chimney you no longer use is prime wall and floor space frozen in place — and removing it cleanly opens up real design possibilities in the room. We take it out the way premium work demands: an engineered cap-to-footing teardown with load paths supported, contained interior demo, and finished wall and floor infill so the space reads as if the chimney was never there. The gas line is capped and pressure-tested, and you get a documented job package. You reclaim the room and forget it existed. Serving Hurst (1 ZIP codes, 39k residents) and surrounding neighborhoods with same-week scheduling.

39k
Hurst residents
1
ZIP codes covered
3
Neighborhoods
CSIA
Certified techs
What is it

Full Chimney Removal to Foundation in Hurst

Full chimney removal to foundation is an engineered cap-to-footing teardown of a stack that isn't worth saving — a structurally failed chimney, a flue that can't be relined, or a feature a homeowner wants gone to open up a wall. It's a structural event, not a wrecking job: load paths supported, every floor and wall it touched made flush and finished, and a roof left as though the chimney had never been part of the home.

Local dossier · Hurst, TX

Removing a fireplace entirely is asked about more than people admit, and in Bellaire and Hurst Hills — compact rooms with a chimney breast eating the best wall — it is sometimes the correct answer. It is also a bigger job than it sounds. A masonry chimney breast is usually load-bearing to some degree or is at least carrying the stack above it, so removing it below means supporting what is above, either by leaving the upper stack and installing gallows brackets or by taking the whole chimney down through the roof. The second is more work and often the tidier outcome, because a chimney retained above with nothing beneath it is a maintenance item forever. Then there is the flue penetration to make good, roofing work, and floor and wall repairs where the breast was. It is a structural project and it needs the right people involved. What you get is a rectangular room and a wall you can use. The honest version: if the motivation is that you never use the fireplace, a sealed insert or even a simple blanking panel is far cheaper. If the motivation is the floor space, removal genuinely delivers it.

Chisholm Park

Why this matters in Hurst

Hurst sits in the heart of the Mid-Cities with a dense stock of 1960s-80s brick ranches. The mature masonry makes freeze-thaw crown cracking and repointing the year-round staple, with relining for the era's undersized clay flues. From feature wall to firebox, we keep the hearth the standout it was built to be. That local stock is exactly why our Hurst crews tailor full chimney removal to foundation to the homes here — not a generic checklist.

The Hurst file · what we actually know

Hurst has about 16,500 housing units: 41% built before 1980, 20% since 2000; 39% heat with gas and 63% are single-family homes. That mix of older masonry and gas appliances is why full chimney removal to foundation here starts with an inspection, not a quote.

Sources: U.S. Census Bureau, American Community Survey 5-Year Estimates (2023).

Common signs in Hurst homes

  • A structurally failed stack, or a flue that simply can't be relined
  • You want a wall opened up or the footprint reclaimed
  • The chimney sits unused and you'd rather remove it than keep maintaining it
  • An earlier partial removal left raw framing or an opening no one sealed

Full Chimney Removal to Foundation in Hurst (Tarrant County) — what's local

Hurst sits in Tarrant County (county seat: Fort Worth). Fort Worth anchors a county of 2.12M residents, where hearths range from cattle-drive-era heritage masonry to modern gated builds in Westlake, giving our team the widest variety of repair scopes in DFW. For full chimney removal to foundation that means our Hurst crew sizes up the local housing stock before quoting — and follows Tarrant County permit requirements for any work that needs an inspection sign-off.

Climate & code file · the DFW Metroplex

DFW is home base for fireplace work done right. Dallas–Fort Worth is where Space Fireplace Services proves that the hearth is the centerpiece of the room and gets treated that way — on a Preston Hollow estate or a Frisco new-build alike. It's also where North-Texas freeze-thaw, hail, and expansive clay do the most damage to brick stacks, so the copy below is written to keep that centerpiece sound through the worst the metro throws at it.

01

Expansive clay soil

Hurst sits on Houston Black clay that can shift several inches between a wet spring and a drought summer. A rigid masonry chimney riding on moving ground develops stair-step cracking through the mortar joints at the base of the stack — the tell that the masonry is being torqued by the soil, not merely weathering. We diagnose active settlement versus stable historic movement before we quote, and we'll tell you honestly when the real cause is foundation-side and has to be addressed first.

02

Hard freezes & spalling

A North-Texas hard freeze — the sub-20°F events of recent winters — drives into brick and crown that soaked up December rain. The trapped water freezes, expands, and pops the outer brick face off: that flaking is freeze-thaw spalling, and in Hurst it's accelerated because our brick takes on water in fall, then meets a sudden January freeze. The fix is sequence-sensitive — waterproof and seal the crown in fall, before the freeze, not after the damage. A breathable repellent that sheds liquid water while letting vapor escape is the premium treatment; a film-forming sealer traps moisture and makes it worse.

03

Hail

DFW sits in the most hail-battered corridor in the country. After spring storm season we check crowns, chase covers, and caps for impact — a dented chase cover that now ponds water instead of shedding it is a leak waiting for the next freeze. Storm damage is also a legitimate NFPA 211 "significant weather event" trigger for a Level 2 scan, and a photographed report is what holds up on an insurance claim.

04

When to book

Schedule masonry repair and crown sealing for September–October: repointing and crown coatings must cure above freezing and be in place before the first burn. Waiting until you smell smoke or see a ceiling stain means doing the work in the worst possible conditions — the expensive version of a cheap fall fix.

Code note · the DFW Metroplex

North-Texas code reality: the 3-2-10 chimney-height rule governs termination, and masonry repointing and crown coatings must cure above freezing — so the inspection and any sealing belong in the September–October window, before the first burn.

Scoped from a graded inspection

At Space Fireplace Services, a full chimney removal to foundation is never guesswork. We scope every job from a graded, photographed inspection first — the NFPA 211 level the evidence calls for — so the work is matched to what your flue and masonry actually need, with the report to prove it. The documented inspection is the record the full chimney removal to foundation is built on.

Chimney inspection in Hurst
What's included

Every full chimney removal to foundation in Hurst

Deliverables

  • Engineered, sequenced demolition with load-path support
  • Framed, drywalled, flush wall/floor infill — finishes coordinated
  • Gas supply permanently capped + pressure-tested
  • Job package: framed-infill photos, gas test, roof water-test

How a job runs

01

Assess + support

Map the load paths and finish-bearing, then shore whatever needs support before demo begins.

02

Demolish top-down

The above-roof stack comes down and the roof is patched; interior demo happens under dust containment; the footing goes if it is in scope.

03

Cap the gas

Disconnect any gas supply, cap it permanently at the branch, and pressure-test the cap.

04

Finish + document

Frame and drywall the chase flush, patch the flooring, coordinate the paint, and deliver the job package.

Coverage

3+ neighborhoods in Hurst

Same-week service across every neighborhood in Hurst. Don't see yours? Call (469) 992-4912 — if it's in Hurst, we cover it.

Bellaire
Mid-Cities corridor
Hurst Hills
Local crew

The Hurst advantage.

Our Hurst crew lives in the metro they serve, across Tarrant County. They know which Hurst neighborhoods — Bellaire, Mid-Cities corridor, Hurst Hills — have crumbling crowns, and which newer builds skipped the cap. Local code knowledge, local referrals, local accountability for every full chimney removal to foundation.

CSIA-certified inspectors
Same-week scheduling in Hurst
1-year workmanship warranty
39k
Hurst residents
1
ZIP codes
3+
Neighborhoods
< 2 min
Human reply · 7 AM – 12 AM
Questions, answered

Full Chimney Removal to Foundation in Hurst — FAQ

Is taking out a full chimney safe for the rest of the house?

Engineered correctly, yes. Our leads map the load paths and bearing conditions before a hammer swings, shore up whatever needs support, and sequence the demolition so the structure stays square throughout. The danger lives with crews who treat removal as simple wrecking, and our discipline exists to be the opposite of that.

Once the masonry is gone, do you finish the walls and floors or just demo it?

The room gets finished, not abandoned. Framing and drywalling the chase, bringing the wall plane back flush, and patching the flooring where the hearth sat are all in the price, along with a coordinated paint and texture hand-off. By our standard, raw framing left behind is a job half done.

Do you remove the underground footing too?

When the scope calls for it, yes. We excavate and break up the concrete footing so nothing below grade interferes with future landscaping or an addition. Some clients choose to leave the footing in place and save the cost, and we lay both options out clearly so the call is yours.

There's a gas fireplace — how is the gas handled?

Our team disconnects the supply, caps it permanently, and runs a pressure and leak test to prove the seal is tight, with the result recorded. Closing a valve and walking away is not how we treat a home; an untested cap-off is a risk we refuse to leave behind.

Will I get documentation of the work?

Documentation comes standard: a job package with photos of the framed infill before it's covered, the gas pressure-test result where applicable, and the roof water-test. That record protects you at resale and lets you trust what sits behind the finished wall.

Can a fireplace be removed completely?

Yes, and it is a structural project rather than a remodel. What is above has to be supported or taken down, and the roof and floor made good.

Is it worth it?

If the goal is floor space and a usable wall, genuinely yes in a compact room. If the goal is just not using the fireplace, there are much cheaper answers.

What about leaving the chimney above?

Possible with proper support, and it leaves you maintaining a chimney serving nothing. Taking it right down is more work now and usually tidier long term.

Do you serve all of Hurst?

Yes — our crews cover Hurst's 1 ZIP code across Tarrant County, including Bellaire, Mid-Cities corridor, Hurst Hills, plus the surrounding communities.

How soon can you schedule full chimney removal to foundation in Hurst?

We offer same-week scheduling across Hurst, booked by a real person in under two minutes, 7 AM to midnight every day.

Why do Hurst homes need full chimney removal to foundation?

Hurst sits in the heart of the Mid-Cities with a dense stock of 1960s-80s brick ranches. The mature masonry makes freeze-thaw crown cracking and repointing the year-round staple, with relining for the era's undersized clay flues. From feature wall to firebox, we keep the hearth the standout it was built to be. Full Chimney Removal to Foundation is part of keeping that local housing stock safe, efficient, and up to code.

How much does full chimney removal to foundation cost in Hurst, TX?

Full Chimney Removal to Foundation in Hurst starts from $3,900, but the honest number depends on what a craftsman finds on site — we won't quote premium work blind. A CSIA-certified technician inspects the actual condition, then hands you an itemized, transparent written quote tied to the findings and built to one national standard. No teaser pricing, no surprises. Call (469) 992-4912 for a free, no-pressure Hurst quote.

Do you offer emergency or same-day full chimney removal to foundation in Hurst?

Yes — we run same-week and emergency full chimney removal to foundation across Hurst, scheduled by a real person 7 AM to midnight every day. For an active chimney hazard, call (469) 992-4912 and we prioritize Hurst dispatch so a craftsman is on it fast.

Is there a CSIA-certified full chimney removal to foundation company near me in Hurst?

Our Hurst crew lives in and works the metro across Tarrant County, including Bellaire, Mid-Cities corridor, Hurst Hills — a certified, local full chimney removal to foundation team genuinely near you, holding the same national craftsmanship standard on every job, not dispatched cold from another city. Call (469) 992-4912.

Last reviewed:

10+
Years
NFPA 211
Compliant
CSIA
Certified
< 2hr
Response
Ready when you are

Talk to a CSIA-certified expert today.

Free written quote. Same-week scheduling. 24/7 emergency response when you need it.

Licensed & Insured Same-Week Scheduling Written Quote, Always
Emergency

24/7 Response

Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.

Emergency line