Had a chimney fire in DFW? Don’t use the fireplace again until a NFPA 211 Level 2 inspection clears it — chimney fires damage flue tiles, smoke chambers, and crowns in ways that aren’t visible from the firebox. Call (972) 920-0833 for same-day inspection. Space Fireplace Services handles this work across the Dallas-Fort Worth Metroplex following NFPA 211 standards. Free inspection, written quote, no surprise fees.
What’s actually involved
A chimney fire is when accumulated creosote in the flue ignites — sometimes loud (rumbling/jet-engine sound), sometimes ‘slow’ fires that the homeowner doesn’t even notice. Either way, the flue gets damaged.
NFPA 211 (the National Fire Protection Association standard) requires a Level 2 inspection after any chimney fire — even if you think it was minor. Level 2 includes a full video flue scan to find cracks, gaps, and damaged liner segments that visual-only inspection misses.
Why this matters: a damaged flue from one fire leaves the home wide open to a second, more severe fire next time you light the fireplace. The damaged liner can also let combustion products (CO, smoke) into wall cavities and living space.
After Level 2 inspection, we provide a written report with the video and a quote for any repair: tile replacement, liner installation, smoke chamber re-parging, or full rebuild depending on damage extent.
Why this matters in DFW specifically
DFW chimney fires cluster in November-February, when seasonal first-fires hit flues that haven’t been swept since the previous spring. We see the same pattern every year — homeowners who burned a fire or two last winter, didn’t sweep, and now have stage-2 creosote ignite on a cold-snap evening. The fire-damage pattern is also predictable: terra-cotta tile cracking on older masonry chimneys, refractory panel damage on prefabs, and crown thermal-shock cracks from rapid heating.
Our process
- Call same-day — (972) 920-0833 — describe the fire (rumbling sound, smoke, fire-department call). We dispatch Level 2 inspection same-day for active fires; next-day for fires that have already been extinguished.
- Level 2 video inspection — Camera on flexible rod through full flue length, video recorded. Smoke chamber, damper, crown, and exterior all documented with photos.
- Written damage assessment — Pass / conditional / repair-required, with annotated video timestamps showing each damage point.
- Repair quote — Fixed-price scope for any required repair: tile replacement, stainless liner install, smoke chamber re-parging, crown rebuild.
- Re-inspection after repair — After repair, second Level 2 verifies the flue is sealed and safe for return to service.
Materials and standards
Post-fire response strictly follows NFPA 211 Level 2 inspection protocol — full video flue scan, written report, photo documentation. CSIA-trained technicians. Insurance claim documentation provided on request.
Pricing ranges (DFW, 2026)
Real DFW market ranges. Your actual quote depends on access, scope, and what we find on inspection — every job is quoted in writing before work begins.
| Service | Typical Range |
|---|---|
| Level 2 inspection (post-fire) | $295 – $475 |
| Full damage report + video | Included |
| Tile replacement (per tile) | $250 – $625 |
| Stainless steel liner install | $2,800 – $6,500 |
| Crown rebuild | $1,200 – $2,800 |
Frequently asked questions
How do I know if I had a chimney fire?
Common signs: loud rumbling or jet-engine sound during a fire, dense smoke from the top of the chimney, popping/cracking sounds, flames visible at the top, or a strong burning smell after the fire was out. ‘Slow’ fires often leave only subtle signs — visible creosote pieces in the firebox, warped damper, or hot spots on the chimney exterior.
Can I use the fireplace before inspection?
No. NFPA 211 explicitly says no return to service until Level 2 inspection clears it. Using a damaged flue dramatically increases risk of a second, more severe fire.
Will my insurance cover this?
Most homeowners policies cover chimney fire damage and required inspection. We provide documented reports/photos for insurance claims.
How fast can you do the inspection?
Same-day for active or just-extinguished fires. Next-day for fires that happened previously.
What if the inspection finds nothing?
Even better — you have written documentation that the flue is intact and safe for use, with the video as evidence. Then a regular sweep before next burn season.
Related services
Ready to schedule?
Call (972) 920-0833 for chimney fire aftermath — nfpa 211 level 2 inspection across DFW, or use our contact form for email. Same-week scheduling for most calls.