Wood-to-Gas Fireplace Conversion in The Colony, TX
Imagine your wood-burning fireplace giving you real flames at the flip of a switch — same beautiful focal point, none of the hauling, ash, or cleanup that keeps you from using it. Converting wood to gas is an engineered project, not just "add a burner": we size or reline the flue for gas, lock the damper open to code, run a BTU-correct gas line with a sediment trap, pressure-test before flame, and verify with a CO check. You get a centerpiece you'll actually light on a Tuesday — with the safety done properly underneath. Serving The Colony (2 ZIP codes, 45k residents) and surrounding neighborhoods with same-week scheduling.
Wood-to-Gas Fireplace Conversion in The Colony
A wood-to-gas conversion turns your wood-burning fireplace into gas — a vented gas log set, a sealed direct-vent insert, or vent-free — handled as an engineered project rather than just "add a burner." The appliance swap is the simple part; the venting changes, code damper lock, gas line, and CO verification around it are what make the difference between a clean, lasting system and a hazard hiding behind a pretty flame.
Local dossier · The Colony, TX
Swapping a 1980s factory fireplace for a modern one sounds like changing an appliance and is closer to keyhole surgery, which is worth understanding before the design stage. The existing unit sits inside a framed enclosure built around it, with a flue running up through the house and a chase outside. A modern sealed unit is a different depth, a different height, and vents differently — most are direct-vent with a coaxial pipe rather than the older air-cooled chimney — so the question is never just what fits the hole. It is what fits the hole without rebuilding the enclosure and re-routing the flue. Sometimes a manufacturer makes a unit dimensioned close enough that the opening can be adapted with framing changes inside the existing enclosure, and the job stays inside one wall. Sometimes it does not, and honesty about that up front is the difference between a two-day job and a two-week one. On Stewart Peninsula and the older Colony streets we measure the enclosure, the flue route and the chase before we show anybody a product. The honest version: shortlist from what fits, not from what you liked in a showroom.
Stewart Peninsula
Why this matters in The Colony
The Colony hugs Lewisville Lake with 1980s-2000s homes plus the newer Tribute lakeside community. Builder prefab fireboxes dominate, and the constant lake humidity makes chase-cover rust and cap replacement the most common calls. Whatever the era, we treat the fireplace as the centerpiece the room was designed around. That local stock is exactly why our The Colony crews tailor wood-to-gas fireplace conversion to the homes here — not a generic checklist.
The The Colony file · what we actually know
The Colony has about 19,000 housing units: 4% built before 1980, 61% since 2000; 28% heat with gas and 69% are single-family homes. Newer subdivisions mostly mean factory-built fireplaces, whose panels and dampers wear on their own schedule, which is why wood-to-gas fireplace conversion here starts with an inspection, not a quote.
Sources: U.S. Census Bureau, American Community Survey 5-Year Estimates (2023).
Common signs in The Colony homes
- Tired of hauling firewood, ash, and cleanup
- Want real-fire ambiance with a wall switch
- You want that heat-losing open fireplace working as a real zone heater
- Your wood firebox is still sound, but you'd rather burn something cleaner
Wood-to-Gas Fireplace Conversion in The Colony (Denton County) — what's local
The Colony sits in Denton County (county seat: Denton). With 1.01M residents, Denton County pairs historic brick around UNT with Flower Mound new-build, putting both ends of the chimney-service spectrum inside a single county. For wood-to-gas fireplace conversion that means our The Colony crew sizes up the local housing stock before quoting — and follows Denton County permit requirements for any work that needs an inspection sign-off.
Climate & code file · the DFW Metroplex
DFW is home base for fireplace work done right. Dallas–Fort Worth is where Space Fireplace Services proves that the hearth is the centerpiece of the room and gets treated that way — on a Preston Hollow estate or a Frisco new-build alike. It's also where North-Texas freeze-thaw, hail, and expansive clay do the most damage to brick stacks, so the copy below is written to keep that centerpiece sound through the worst the metro throws at it.
Expansive clay soil
The Colony sits on Houston Black clay that can shift several inches between a wet spring and a drought summer. A rigid masonry chimney riding on moving ground develops stair-step cracking through the mortar joints at the base of the stack — the tell that the masonry is being torqued by the soil, not merely weathering. We diagnose active settlement versus stable historic movement before we quote, and we'll tell you honestly when the real cause is foundation-side and has to be addressed first.
Hard freezes & spalling
A North-Texas hard freeze — the sub-20°F events of recent winters — drives into brick and crown that soaked up December rain. The trapped water freezes, expands, and pops the outer brick face off: that flaking is freeze-thaw spalling, and in The Colony it's accelerated because our brick takes on water in fall, then meets a sudden January freeze. The fix is sequence-sensitive — waterproof and seal the crown in fall, before the freeze, not after the damage. A breathable repellent that sheds liquid water while letting vapor escape is the premium treatment; a film-forming sealer traps moisture and makes it worse.
Hail
DFW sits in the most hail-battered corridor in the country. After spring storm season we check crowns, chase covers, and caps for impact — a dented chase cover that now ponds water instead of shedding it is a leak waiting for the next freeze. Storm damage is also a legitimate NFPA 211 "significant weather event" trigger for a Level 2 scan, and a photographed report is what holds up on an insurance claim.
When to book
Schedule masonry repair and crown sealing for September–October: repointing and crown coatings must cure above freezing and be in place before the first burn. Waiting until you smell smoke or see a ceiling stain means doing the work in the worst possible conditions — the expensive version of a cheap fall fix.
Code note · the DFW Metroplex
North-Texas code reality: the 3-2-10 chimney-height rule governs termination, and masonry repointing and crown coatings must cure above freezing — so the inspection and any sealing belong in the September–October window, before the first burn.
Built to code · Wood-to-Gas Fireplace Conversion in The Colony
Wood-to-Gas Fireplace Conversion is held to published national standards no matter the city. Our The Colony crew builds to these and documents the work; the locally-adopted code edition and permit requirements are confirmed with Denton County's authority on every job.
- Damper permanently locked open — On a vented gas log conversion we permanently clamp the damper open or remove its plate entirely, so combustion products can never be trapped behind a closed damper above a live gas flame.
- Flue relined / sized for gas — Switch the fuel and you change the flue gas itself: its temperature, its volume, its acidity. That is why the masonry flue gets relined or downsized with a correctly-rated gas liner per NFPA 211, so it does not condense, corrode, or back-draft.
- Gas connection (NFPA 54) — Sizing the gas drop to the appliance BTU load comes first, then the NFPA 54 sediment trap and shutoff go in, and the line is pressure-tested by manometer before any flame.
- Sealed insert: positive connection — A sealed direct-vent insert gets a positive liner connection running from the appliance collar all the way to the cap; venting it into an open flue that condenses and back-drafts is never an option.
- CO check + ODS verification — Commissioning includes an ambient CO check with the unit operating, and if the conversion is vent-free, the oxygen-depletion-sensor (ODS) pilot is verified as well.
Scoped from a graded inspection
At Space Fireplace Services, a wood-to-gas fireplace conversion is never guesswork. We scope every job from a graded, photographed inspection first — the NFPA 211 level the evidence calls for — so the work is matched to what your flue and masonry actually need, with the report to prove it. The documented inspection is the record the wood-to-gas fireplace conversion is built on.
Chimney inspection in The ColonyEvery wood-to-gas fireplace conversion in The Colony
Deliverables
- Flue relined or downsized to suit gas so it drafts cleanly instead of condensing or back-drafting into the room
- For vented log sets, the code-required damper clamp locked open, or the plate removed entirely where that's the call
- A BTU-correct gas drop finished with a sediment trap, a shutoff, and a pressure test before the flame ever lights
- Ambient CO check + leak test at commissioning
How a job runs
Assess
Look over the firebox, the flue size, and where the gas can come from, then choose the right path.
Vent
Right-size the flue, relining or downsizing as needed, then lock the damper open to code.
Connect
Run a BTU-correct gas drop with a sediment trap and set the appliance.
Commission
Pressure-test, leak-test, and run an ambient CO check before we hand it over.
4+ neighborhoods in The Colony
Same-week service across every neighborhood in The Colony. Don't see yours? Call (469) 992-4912 — if it's in The Colony, we cover it.
The The Colony advantage.
Our The Colony crew lives in the metro they serve, across Denton County. They know which The Colony neighborhoods — Stewart Peninsula, Castle Hills line, Tribute and more — have crumbling crowns, and which newer builds skipped the cap. Local code knowledge, local referrals, local accountability for every wood-to-gas fireplace conversion.
More services in The Colony
Wood-to-Gas Fireplace Conversion in nearby Denton cities
We cover wood-to-gas fireplace conversion across Denton County — same crew, same warranty. Nearby The Colony cities we also serve:
Wood-to-Gas Fireplace Conversion in The Colony — FAQ
I'd like to convert my wood fireplace to gas — what does that really involve?
A proper conversion is a sequence, not a burner swap. The flue gets sized or relined for gas, the damper gets locked open, which code requires for vented log sets, a BTU-correct gas line goes in with its sediment trap, and everything is pressure-tested before any flame. A CO check then confirms the room is safe to enjoy. That full chain is why the finished fireplace keeps performing instead of merely lighting.
Should I choose gas logs, a sealed insert, or electric?
Start with how you want the room to feel. Vented gas logs come closest to the character of a real open fire; a sealed direct-vent insert delivers the most heat and efficiency; electric asks nothing of you, no fuel, no maintenance. Our job is to fit the conversion to the way you will actually live with the room, not to steer you toward the biggest ticket.
If I'm switching to gas, why does the flue need work when the chimney's already there?
Your chimney was built around a wood fire, and gas is a different animal: different exhaust temperature, different volume, different acidity. Run gas up an oversized or mismatched flue and it condenses, corrodes, and back-drafts. Relining or downsizing to suit the new appliance is what keeps the conversion clean and safe, so it is never an optional line on the quote.
Can I convert back to wood later if I change my mind?
In many cases, yes, though it hinges on what your conversion involved. A removable log set walks back easily; a built-in sealed insert with a permanent liner does not. Before you commit, we spell out exactly how reversible your particular path is, so you choose with the full picture in front of you.
Is a vent-free gas conversion a good idea?
For the right space, it can be. Vent-free units run on an oxygen-depletion-sensor burner and need no chimney at all, which makes them appealing for supplemental heat. The trade-off is real, though: they release humidity and combustion products into the room itself. We are candid about where that works and where a vented or sealed unit serves the room better.
Can I just swap my old fireplace for a new one?
Sometimes. Modern sealed units differ in depth, height and venting from 1980s ones, so the real question is what fits without rebuilding the enclosure and re-routing the flue.
How do you decide what is possible?
By measuring the enclosure, the flue route and the chase before showing you any product. Shortlisting from a showroom first is how these projects double.
What if nothing fits?
Then it is a construction job rather than a swap, and we say so with the numbers up front. Some clients proceed and some change scope — both are fine, surprises are not.
Do you serve all of The Colony?
Yes — our crews cover The Colony's 2 ZIP codes across Denton County, including Stewart Peninsula, Castle Hills line, Tribute, plus the surrounding communities.
How soon can you schedule wood-to-gas fireplace conversion in The Colony?
We offer same-week scheduling across The Colony, booked by a real person in under two minutes, 7 AM to midnight every day.
Why do The Colony homes need wood-to-gas fireplace conversion?
The Colony hugs Lewisville Lake with 1980s-2000s homes plus the newer Tribute lakeside community. Builder prefab fireboxes dominate, and the constant lake humidity makes chase-cover rust and cap replacement the most common calls. Whatever the era, we treat the fireplace as the centerpiece the room was designed around. Wood-to-Gas Fireplace Conversion is part of keeping that local housing stock safe, efficient, and up to code.
How much does wood-to-gas fireplace conversion cost in The Colony, TX?
Wood-to-Gas Fireplace Conversion in The Colony starts from $2,250, but the honest number depends on what a craftsman finds on site — we won't quote premium work blind. A CSIA-certified technician inspects the actual condition, then hands you an itemized, transparent written quote tied to the findings and built to one national standard. No teaser pricing, no surprises. Call (469) 992-4912 for a free, no-pressure The Colony quote.
Do you offer emergency or same-day wood-to-gas fireplace conversion in The Colony?
Yes — we run same-week and emergency wood-to-gas fireplace conversion across The Colony, scheduled by a real person 7 AM to midnight every day. For an active chimney hazard, call (469) 992-4912 and we prioritize The Colony dispatch so a craftsman is on it fast.
Is there a CSIA-certified wood-to-gas fireplace conversion company near me in The Colony?
Our The Colony crew lives in and works the metro across Denton County, including Stewart Peninsula, Castle Hills line, Tribute — a certified, local wood-to-gas fireplace conversion team genuinely near you, holding the same national craftsmanship standard on every job, not dispatched cold from another city. Call (469) 992-4912.
Last reviewed:
Talk to a CSIA-certified expert today.
Free written quote. Same-week scheduling. 24/7 emergency response when you need it.
24/7 Response
Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.
Emergency line