Skip to main content
Remediation & Remodel · From $2,800

Fireplace Refacing — Stone & Brick Veneer

Refacing the fireplace is the single highest-impact change you can make to a room — swap a dated surround for floor-to-ceiling stone or brick veneer and the entire space reads new. We do it to an heirloom standard, the way masons work rather than decorators: substrate properly prepped so veneer never delaminates, coursing and corner returns planned so the pattern reads naturally and continuously, and the detail amateurs miss — code clearances to combustibles honored around a working firebox. You get a stunning new centerpiece that's also safe to actually light.

Duration
Few days
Warranty
1-year workmanship
Built to
NFPA 211 · IRC
Human reply
< 2 min
What is it

What is fireplace refacing — stone & brick veneer?

Refacing the fireplace is the single highest-impact change you can make to a room — and the one most likely to be ruined by treating masonry as a weekend craft project. Manufactured or natural thin-stone and brick veneer over a surround transforms the space, but only when it's set by people who understand substrate prep, clearance, and how hot a fireplace actually gets. Space Fireplace Services refaces fireplaces to an heirloom standard: tight, plumb veneer, honored clearances, and a finish that still reads crisp a decade in.

A reface lives or dies on the substrate and the layout. Veneer set over a poorly prepped, dirty, or sealed surface delaminates and drops stones within a year; veneer laid out without planning leaves ugly cut slivers in the wrong places and inconsistent joints. We prep the substrate properly, plan the coursing and corner returns so the pattern reads naturally, and set each piece for consistent joints and a true plane. Natural stone is selected and dry-laid for color and size distribution so the finished wall looks composed rather than random.

What separates a mason's reface from a decorator's is clearance. The zone around a working firebox carries code-required clearances to combustibles, and the veneer, any mantel, and any added trim all have to respect them. We honor the non-combustible clearances around the opening, set a mantel at the correct distance from the firebox — hidden steel cleats or float brackets where the design calls for a floating beam — and make sure nothing about the new face compromises the fireplace's safe operation.

Durability is the other premium promise. We use the right setting materials and finish the surround with a breathable penetrating sealer so soot wipes off and the color stays even — without trapping moisture in the masonry. Because we control the masonry, we can also fix what's behind the face while we're in there — an undersized hearth extension brought to code, a tired firebox refinished, a surround that needs a structural tweak. A reface is the right moment to make the whole fireplace right, not merely its surface.

Common signs you need this service

  • A dated or builder-grade surround that you're ready to see transformed
  • An earlier veneer reface that has started delaminating or dropping its stones
  • You want a floating mantel beam set at the right clearance and anchored safely
  • You want the firebox or hearth put right in the same visit as the reface

Every fireplace refacing — stone & brick veneer includes:

  • Proper substrate prep + planned coursing and corner returns
  • Code-clearance veneer, mantel, and trim around the firebox
  • Concealed steel-cleat floating mantel anchoring where designed
  • Breathable penetrating sealer on the finished surround

Materials we use

Natural / Thin-Stone VeneerBrick VeneerConcealed Steel Mantel CleatsBreathable Penetrating Sealer

Scoped from a graded inspection

At Space Fireplace Services, a fireplace refacing — stone & brick veneer is never guesswork. We scope every job from a graded, photographed inspection first — the NFPA 211 level the evidence calls for — so the work is matched to what your flue and masonry actually need, with the report to prove it. The documented inspection is the record the fireplace refacing — stone & brick veneer is built on.

Chimney inspection
Built to code

The code your fireplace refacing — stone & brick veneer has to meet.

A fireplace refacing — stone & brick veneer isn't a matter of opinion — it's held to published national standards. Space Fireplace builds every job to the named codes below and documents it, so the work is provably right for an inspector, an insurer, or a future buyer. These are the universal standards; your city's permit and inspection requirements are confirmed with the local authority before we pull the job.

NFPA 211NFPA 54UL-1777UL-103HTIRC

Clearances to combustibles

Code-required clearances to combustibles surround the opening of any working firebox, and the veneer, mantel, and trim are detailed to respect them, so the finished reface is as safe to light as it is beautiful to live with.

Hearth extension projection

If the reface reaches an undersized hearth extension, it gets brought out to the code-required projection in front of and beside the firebox opening.

Codes cited are the established national standards (NFPA, UL, IRC) that govern this service. The adopted code edition, permit, and inspection requirements vary by city —Space Fireplace verifies them with your local authority having jurisdiction on every job.

Our process

How a fireplace refacing — stone & brick veneer job runs.

01

Prep + plan

Substrate prep comes first, coursing and corner returns get mapped, and natural stone is dry-laid to check color and size.

02

Honor clearance

We lay out the veneer, mantel, and trim so the code clearances around a working firebox are honored throughout.

03

Set the veneer

Each piece goes in with consistent joints on a true plane, and a floating mantel hangs on concealed cleats.

04

Seal + correct

We apply a breathable penetrating sealer, and where the face is coming off we correct the hearth or firebox behind it.

Why choose us

Why DFW homeowners pick Space Fireplace for fireplace refacing — stone & brick veneer.

We've worked on 1,000+ DFW homes over 10+ years. Every job — small sweep or full rebuild — runs the same way: certified technicians, written quotes, photo reports, warranty in writing.

10+
Years experience
CSIA
Certified techs
23
Metros covered

The substrate is prepped correctly so your veneer won't delaminate later and start shedding stones

Coursing and corner returns are laid out in advance, with natural stone dry-fit first for a wall that reads as one composed piece

Code clearances to combustibles are respected across the veneer, the mantel, and every piece of trim

The corrections behind the face — hearth brought to code, firebox refinished — get handled while the wall is open

Who we are

Space Fireplace Services. 10+ years on DFW chimneys.

Family-owned, CSIA-certified, NFPA 211–compliant. We're the team you call when you want it done right the first time — no rotating subcontractors, no upsell pressure, no surprises. Same techs, same trucks, same standard.

CSIA Certified
Chimney Safety Institute of America
NFPA 211 Compliant
Code-compliant on every job
Owner on every job
Personal accountability, every time
1-year workmanship warranty
In writing, every job
Space Fireplace Services technicians on site
Space Fireplace
DFW Metroplex · CSIA-Certified
NFPA 211
Code compliant
FAQ

Common questions about fireplace refacing — stone & brick veneer.

How often should the chimney behind a fireplace be swept?

Plan on a Level 1 inspection every year — that's the NFPA cadence — with an actual sweep once buildup reaches 1/8" of creosote. For a fireplace you light through the season, that usually lands at once a heating season. Think of it as the upkeep that keeps the centerpiece of the room clean, drawing well, and ready to look its best.

Are the people working on my fireplace certified?

Yes. The inspectors who assess your chimney hold current CSIA (Chimney Safety Institute of America) certifications — you can confirm them in the CSIA member directory at csia.org — and our fireplace installations are handled by NFI specialists. The craft that makes a hearth a showpiece starts with the people standing in front of it.

Can you come out fast when something goes wrong?

Yes — emergency response is available 24/7 (subject to crew availability) for active water leaks, an animal trapped in the flue, post-fire damage, and storm damage, same-day in most cases. A fireplace is the heart of a room; when it's at risk, we treat it that way.

Will I see a written quote before any work starts?

Always. You get a written quote before a single tool comes out, with photos of exactly what we found. Final pricing tracks the chimney's real condition and anything additional the inspection surfaces — no surprises, just a clear picture of what your fireplace needs.

Is there a maintenance plan that keeps it all on schedule?

Yes — our annual maintenance membership runs $19.99/month ($240/year) and covers a yearly Level 1 inspection and sweep ($248 value), priority scheduling, 10% off all repairs, and emergency-response priority. Cancel anytime, no contract. It's the quiet way to keep your hearth looking and working its best year after year.

Last reviewed:

10+
Years
NFPA 211
Compliant
CSIA
Certified
< 2hr
Response
Ready when you are

Talk to a CSIA-certified expert today.

Free written quote. Same-week scheduling. 24/7 emergency response when you need it.

Licensed & Insured Same-Week Scheduling Written Quote, Always
Emergency

24/7 Response

Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.

Emergency line
Call NowBook