Fireplace Services in Arlington, TX
This is where a room gets its anchor. We design and install fireplaces — wood-burning, gas (vented or vent-free), or electric — as a complete centerpiece: the hearth, the surround, the proportions, and the venting or gas line that makes it work. The conversation starts with how you want the room to feel and what the focal wall should look like, then we engineer the firebox and flue to deliver it safely and to code. We also clean, repair, and maintain existing fireplaces so the one you have keeps earning its place in the room. Serving Arlington (17 ZIP codes, 399k residents) and surrounding neighborhoods with same-week scheduling.
Fireplace Services in Arlington
Fireplace installation is where a room gets its centerpiece — new builds and replacements across wood-burning, gas (vented and vent-free), and electric units, taken from appliance to hearth, surround, gas line, venting, and code inspection. An NFI specialist signs off every gas install, and every wood install meets NFPA 211 clearance specs, so the fireplace anchoring your room is as sound behind the finish as it looks in front of it.
Local dossier · Arlington, TX
Half the living rooms in Arlington share the same wall: floor-to-ceiling brick, a firebox in the middle, a raised hearth running the width of the room. The city grew fast after the GM plant opened in 1954 and then exploded through the 70s and 80s, so that wall shows up everywhere from ranches near Randol Mill to two-stories off Green Oaks. It's a canvas, and it's why re-faces are most of our Arlington design work — plaster, large-format tile, or a steel surround over the old brick, with the hearth kept or dropped to floor level depending on how the room wants to sit. Underneath, the story is age. Those 1980s builder fireboxes are past their service life, and replacement parts for most were discontinued years ago, so a re-face is usually the moment to set a sealed gas insert inside the old opening and vent it through a new liner. Newer homes down toward the Mansfield line are a different job — media walls, linear units, heat management for the TV above. One honest note: sometimes painting the brick is genuinely the right call, and it costs a tenth of a re-face. We'll say so when it's true. Either way, the gas work gets permitted, inspected, and photographed before we call anything finished.
AT&T Stadium
Why this matters in Arlington
Arlington's mid-century brick ranches and the newer Viridian master-planned community sit squarely between Dallas and Fort Worth. Freeze-thaw crown cracking on the older stock and prefab cap work on the newer builds are the year-round staples. From feature wall to firebox, we keep the hearth the standout it was built to be. That local stock is exactly why our Arlington crews tailor fireplace services to the homes here — not a generic checklist.
Common signs in Arlington homes
- Adding a fireplace where there wasn't one
- Replacing an old wood-burner with gas or electric
- Fitting a fireplace insert into an existing masonry chimney
- Outdoor fireplace or fire pit installation
Fireplace Services in Arlington (Tarrant County) — what's local
Arlington sits in Tarrant County (county seat: Fort Worth). Fort Worth anchors a county of 2.12M residents, where hearths range from cattle-drive-era heritage masonry to modern gated builds in Westlake, giving our team the widest variety of repair scopes in DFW. For fireplace services that means our Arlington crew sizes up the local housing stock before quoting — and follows Tarrant County permit requirements for any work that needs an inspection sign-off.
Climate & code file · the DFW Metroplex
DFW is home base for fireplace work done right. Dallas–Fort Worth is where Space Fireplace Services proves that the hearth is the centerpiece of the room and gets treated that way — on a Preston Hollow estate or a Frisco new-build alike. It's also where North-Texas freeze-thaw, hail, and expansive clay do the most damage to brick stacks, so the copy below is written to keep that centerpiece sound through the worst the metro throws at it.
Expansive clay soil
Arlington sits on Houston Black clay that can shift several inches between a wet spring and a drought summer. A rigid masonry chimney riding on moving ground develops stair-step cracking through the mortar joints at the base of the stack — the tell that the masonry is being torqued by the soil, not merely weathering. We diagnose active settlement versus stable historic movement before we quote, and we'll tell you honestly when the real cause is foundation-side and has to be addressed first.
Hard freezes & spalling
A North-Texas hard freeze — the sub-20°F events of recent winters — drives into brick and crown that soaked up December rain. The trapped water freezes, expands, and pops the outer brick face off: that flaking is freeze-thaw spalling, and in Arlington it's accelerated because our brick takes on water in fall, then meets a sudden January freeze. The fix is sequence-sensitive — waterproof and seal the crown in fall, before the freeze, not after the damage. A breathable repellent that sheds liquid water while letting vapor escape is the premium treatment; a film-forming sealer traps moisture and makes it worse.
Hail
DFW sits in the most hail-battered corridor in the country. After spring storm season we check crowns, chase covers, and caps for impact — a dented chase cover that now ponds water instead of shedding it is a leak waiting for the next freeze. Storm damage is also a legitimate NFPA 211 "significant weather event" trigger for a Level 2 scan, and a photographed report is what holds up on an insurance claim.
When to book
Schedule masonry repair and crown sealing for September–October: repointing and crown coatings must cure above freezing and be in place before the first burn. Waiting until you smell smoke or see a ceiling stain means doing the work in the worst possible conditions — the expensive version of a cheap fall fix.
Code note · the DFW Metroplex
North-Texas code reality: the 3-2-10 chimney-height rule governs termination, and masonry repointing and crown coatings must cure above freezing — so the inspection and any sealing belong in the September–October window, before the first burn.
Scoped from a graded inspection
At Space Fireplace Services, a fireplace services is never guesswork. We scope every job from a graded, photographed inspection first — the NFPA 211 level the evidence calls for — so the work is matched to what your flue and masonry actually need, with the report to prove it. The documented inspection is the record the fireplace services is built on.
Chimney inspection in ArlingtonEvery fireplace services in Arlington
Deliverables
- Full sweep + inspection
- Soot containment + HEPA vacuum
- Level 1 visual inspection report
- Photos of any code issues
- Recommendations + written quote
- Drop cloths + clean cleanup
How a job runs
Consultation
Wood, gas, or electric — chosen for the room and sized to the budget.
Permit
We handle municipal permits, gas-line approvals, inspections.
Install
Appliance, hearth, surround, venting — all code-compliant.
Sign-off
An NFI specialist signs off, the final inspection passes, and you're set.
7+ neighborhoods in Arlington
Same-week service across every neighborhood in Arlington. Don't see yours? Call (469) 992-4912 — if it's in Arlington, we cover it.
The Arlington advantage.
Our Arlington crew lives in the metro they serve, across Tarrant County. They know which Arlington neighborhoods — Pantego, Dalworthington Gardens, Viridian and more — have crumbling crowns, and which newer builds skipped the cap. Local code knowledge, local referrals, local accountability for every fireplace services.
More services in Arlington
Fireplace Services in nearby Tarrant cities
We cover fireplace services across Tarrant County — same crew, same warranty. Nearby Arlington cities we also serve:
Fireplace Services in Arlington — FAQ
Do I need a permit to install a new fireplace?
Almost always for wood and gas units. Gas appliances require a mechanical/gas permit plus an inspection of the gas line and venting, while a wood-burning fireplace needs a permit confirming clearances to combustibles and a code-compliant flue. Plug-in electric models generally skip the permit entirely, since there's no venting or gas involved. Bypass a required permit, though, and you risk a stalled home sale and voided insurance after a fire.
Why do wood, gas, and electric fireplaces land at such different price points?
It comes down to how much has to happen behind the beautiful face. Electric units are cheapest because they need no venting or gas line — they're the easy showroom win. Gas inserts add a gas line plus direct-vent or B-vent piping. Wood-burning units cost the most because they require a full insulated flue, proper clearances, and often framing or hearth work. Venting length, roofline height, and whether a gas line already exists are the biggest cost swings — and we walk you through which look is worth which investment.
How long does a fireplace installation take?
It depends on the design. Setting a gas or electric insert into an existing opening often wraps in a day or less. Building a new wood-burning fireplace with chimney and framing typically runs two to four days, with an added wait for the required inspection between rough-in and finish. Expect more time if the project calls for a new gas line or a roof penetration.
Can I install a fireplace myself?
If it's an electric plug-in unit, yes, those are genuinely DIY-friendly. Anything with gas must be connected by a licensed gas technician, and a wood-burning install done with wrong clearances or venting is a serious fire and carbon-monoxide hazard that also voids manufacturer and insurance coverage. Venting and clearance work is exactly where DIY jobs fail inspection.
Is a fresh install still on the hook for yearly inspection and sweeping?
It does. Age doesn't exempt a system from NFPA 211, which calls for at least a Level 1 inspection of chimneys, fireplaces, and vents every year. A wood-burner also needs sweeping once soot or creosote reaches roughly 1/8 inch or any glaze appears, and a gas appliance needs its venting checked yearly for blockage, corrosion, and spillage.
My 1980s Arlington fireplace has the brass-and-glass doors. Can it be modernized without demolition?
Yes, and demolition is usually the wrong tool anyway. We set a sealed gas insert inside the existing opening, run a new stainless liner up the old chimney, and build the new surround right over the brick. The dated box becomes a shell nobody sees. Most of these remodels take days, not weeks, and the room keeps its bones.
Can you convert a wood-burning fireplace to gas in Arlington?
Yes — the real choice is between vented gas logs, which keep the open-fire look but send most heat up the flue, and a sealed insert, which actually heats the room. Either way Arlington requires a permit for the gas line, a licensed plumber runs it, and we draft-test the chimney before handoff. You get photos of all of it.
What should I look at in the showroom before a re-face?
Scale and flame, mostly. A 36-inch flame reads completely differently against a 14-foot brick wall than in a showroom bay, so bring photos and wall dimensions. Seeing burn media in person — logs, stones, glass — settles arguments a screen can't. An hour in front of burning units usually saves two rounds of second-guessing later.
Do you serve all of Arlington?
Yes — our crews cover Arlington's 17 ZIP codes across Tarrant County, including Pantego, Dalworthington Gardens, Viridian, plus the surrounding communities.
How soon can you schedule fireplace services in Arlington?
We offer same-week scheduling across Arlington, booked by a real person in under two minutes, 7 AM to midnight every day.
Why do Arlington homes need fireplace services?
Arlington's mid-century brick ranches and the newer Viridian master-planned community sit squarely between Dallas and Fort Worth. Freeze-thaw crown cracking on the older stock and prefab cap work on the newer builds are the year-round staples. From feature wall to firebox, we keep the hearth the standout it was built to be. Fireplace Services is part of keeping that local housing stock safe, efficient, and up to code.
How much does fireplace services cost in Arlington, TX?
Fireplace Services in Arlington starts from $2,250, but the honest number depends on what a craftsman finds on site — we won't quote premium work blind. A CSIA-certified technician inspects the actual condition, then hands you an itemized, transparent written quote tied to the findings and built to one national standard. No teaser pricing, no surprises. Call (469) 992-4912 for a free, no-pressure Arlington quote.
Do you offer emergency or same-day fireplace services in Arlington?
Yes — we run same-week and emergency fireplace services across Arlington, scheduled by a real person 7 AM to midnight every day. For an active chimney hazard, call (469) 992-4912 and we prioritize Arlington dispatch so a craftsman is on it fast.
Is there a CSIA-certified fireplace services company near me in Arlington?
Our Arlington crew lives in and works the metro across Tarrant County, including Pantego, Dalworthington Gardens, Viridian — a certified, local fireplace services team genuinely near you, holding the same national craftsmanship standard on every job, not dispatched cold from another city. Call (469) 992-4912.
Last reviewed:
Talk to a CSIA-certified expert today.
Free written quote. Same-week scheduling. 24/7 emergency response when you need it.
24/7 Response
Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.
Emergency line