A fireplace is the emotional center of a home — and in Tempe, Arizona, getting that installation right is the difference between a room people gather in and one they walk past. Space Fireplace Services is a design-led installation atelier. We pair you with a designer, an installation lead, and a finish team so the hearth you imagined becomes the hearth your family lives around.
Our Tempe clients live with stucco-clad masonry chimneys, Heatilator and Superior prefab units common in 1990s-2010s tract homes, and many gas-only fireplaces with B-vent, and we engineer each new build around how the room actually flows. Whether you’re rebuilding a tired masonry opening, dropping in a modern linear gas unit, or floating a sculptural surround over a wood-burning core, we handle architectural drawings, venting layout, gas line routing, and the millwork or stone finish. Transform your space — start with the fireplace.
Fireplace Installation Services in Tempe
Space Fireplace Services installs in Tempe the way a couture house cuts a suit: measured, considered, and finished to a standard that doesn’t show seams. Most Tempe homes we work in feature stucco-clad masonry chimneys, Heatilator and Superior prefab units common in 1990s-2010s tract homes, and many gas-only fireplaces with B-vent, and our design team engineers each installation around that reality and around the way you’ll actually live in the room. We treat the fireplace as the architectural anchor of the space — because that’s exactly what it becomes once it’s lit.
Modern Linear Gas Fireplaces
The single most-requested install in the Tempe market is a 60-to-84-inch linear direct-vent gas unit set into a floor-to-ceiling stone or steel surround. We specify appliances from Heat & Glo, Ortal, and Stuv, then design the venting run, gas line, and finish in one continuous workflow. The result is a quiet, calibrated flame presentation with the heat output of a working appliance and the visual weight of installed architecture — not a unit that looks like it was added after the fact.
Traditional Masonry Wood-Burning
For Tempe clients renovating older homes, a real wood-burning hearth still matters. We build to NFPA 211 clearances, install lined flues to the proper height above the roofline, and finish with brick, limestone, or hand-cast plaster. A properly built masonry fireplace in Tempe will outlast the homeowner — it’s the longest-lasting installation we offer, and the finish work matters as much as the engineering.
Indoor/Outdoor See-Through
The Florida-style indoor/outdoor see-through fireplace has migrated north — we install these regularly in Tempe new builds. Done right, they require careful wind-load engineering on the outdoor face and proper combustion air on the indoor face. The finished result is a single hearth visible from both the living room and the patio, and it changes how families use the back of the house year-round.
Electric & Vent-Free Options
Bedrooms, offices, basements, and condos where venting isn’t possible: a modern electric fireplace with realistic flame and integrated heat is the right answer. We also install vent-free gas where Tempe code permits. Today’s electric units from Modern Flames, Dimplex, and Napoleon look nothing like the units sold a decade ago — the flame technology, the heat distribution, and the surround integration have all changed.
Outdoor Fireplaces & Fire Features
Tempe outdoor living seasons are long enough to justify a real outdoor fireplace. We design and install full masonry outdoor hearths, linear gas outdoor units, and fire tables — coordinated with your hardscape and landscape contractors when needed.
The Space Fireplace Installation Workflow
Step one: an in-home design consultation in Tempe. Step two: a fixed-fee design proposal with renderings and material samples. Step three: permitting and engineering. Step four: rough-in install with gas, venting, and framing. Step five: finish work — stone, tile, millwork, mantel. Step six: final inspection and the first-fire walkthrough. You see every stage; nothing is hidden behind a contractor wall.
The Space Fireplace Difference
One designer. One installation lead. One finish crew. One five-year workmanship warranty. Arizona enforces the 2018 IRC; Maricopa County requires a mechanical permit for any flue or appliance change — we handle permitting, inspections, and the closing certificate. Your fireplace arrives the way it was drawn, on the schedule we committed to, in the Tempe home you were already excited about. Transform your space — start with the fireplace.
Materials, Surrounds & Mantels in Tempe
The appliance is the engine; the surround is the room. Our atelier works in honed limestone, book-matched marble, blackened steel, hand-troweled Venetian plaster, reclaimed timber, and architectural concrete. For Tempe clients we typically present three material palettes during the design phase, with samples in-hand so you choose against the actual light in the actual room — never against a screen rendering.
Investment, Timeline & What to Expect
A simple direct-vent gas install in a Tempe home with an existing opening completes in 2 to 3 days. A modern linear build with a new floor-to-ceiling surround runs 3 to 5 weeks from deposit to handover. A statement masonry project with custom millwork and stone is a 6-to-12-week engagement. We are not the fastest installer in Tempe — we are the one whose finished installation still looks editorial five years later.
Frequently Asked Questions
What warranty do I receive on a Space Fireplace install?
Five years on workmanship — gas connections, venting, framing, and finish. Appliance warranties from manufacturers (Heat & Glo, Stuv, Ortal, Valor, etc.) typically run 7 to 10 years on the firebox and lifetime on the burner. We register the appliance on your behalf.
How does the Space Fireplace Services design process start?
We begin with a 60-minute in-home consultation at your Tempe property. A designer measures the space, listens to how you want to use the room, and pulls together a moodboard. You receive a fixed-fee design proposal within 5 business days.
Can you install a fireplace in a Tempe home that doesn’t currently have one?
Yes — that’s our specialty. We handle structural framing, exterior venting (B-vent, direct-vent, or Class A chimney), gas line routing, and the surround. Arizona enforces the 2018 IRC; Maricopa County requires a mechanical permit for any flue or appliance change — we coordinate permits and inspections so you don’t have to.
What fireplace styles do you install most often in Tempe?
In the Tempe market our top three are modern linear direct-vent gas units (often 60 to 84 inches wide), traditional masonry wood-burning hearths in renovated older homes, and vent-free indoor/outdoor gas installations for entertaining spaces. We work with stucco-clad masonry chimneys.
Do you offer wood-burning, gas, and electric options?
All three. Wood-burning requires the most engineering — chimney, clearances, and combustion air. Gas (direct-vent or vent-free) is the most popular new install in Tempe. Electric is ideal where venting isn’t possible and works beautifully in bedrooms and offices.